Home ProductsPaver Rubber Tracks

Rubber Track 483*152.4*52 fit for Paver Blaw Knox PF5510,Ingersoll-Rand PF5510 Volvo PF5510

Certification
China Shanghai Puyi Industrial Co., Ltd. certification
China Shanghai Puyi Industrial Co., Ltd. certification
I'm Online Chat Now

Rubber Track 483*152.4*52 fit for Paver Blaw Knox PF5510,Ingersoll-Rand PF5510 Volvo PF5510

Rubber Track 483*152.4*52 fit for Paver Blaw Knox PF5510,Ingersoll-Rand PF5510 Volvo PF5510
Rubber Track 483*152.4*52 fit for Paver Blaw Knox PF5510,Ingersoll-Rand PF5510 Volvo PF5510 Rubber Track 483*152.4*52 fit for Paver Blaw Knox PF5510,Ingersoll-Rand PF5510 Volvo PF5510 Rubber Track 483*152.4*52 fit for Paver Blaw Knox PF5510,Ingersoll-Rand PF5510 Volvo PF5510

Large Image :  Rubber Track 483*152.4*52 fit for Paver Blaw Knox PF5510,Ingersoll-Rand PF5510 Volvo PF5510

Product Details:
Place of Origin: Shanghai
Brand Name: PY
Certification: ISO9001
Model Number: 483*152.4*52
Payment & Shipping Terms:
Minimum Order Quantity: 2 PCS
Price: Negotiable
Packaging Details: Bare Packing or Wooden Pallet
Delivery Time: 15-20 days
Payment Terms: T/T, L/C, Western Union
Supply Ability: 500 pieces per month
Detailed Product Description
Width: 483mm Pitch: 152.4mm
Link: 52 Overall Length: 7924.8mm
Weight: 315.64kg Material: Rubber And Steel
High Light:

rubber track belt

,

rubber crawler tracks

Blaw Knox PF5510 Paver Rubber Track 483x152.4x52 Ingersoll Rand Volvo

 

Applicable machines various kinds of pavers
Material rubber and steel
Specification 483*152.4*52
Installation position Installed on the paver

 

Rubber Track 483*152.4*52 fit for Paver Blaw Knox PF5510,Ingersoll-Rand PF5510 Volvo PF5510 0

The characteristics of rubber tracks
1.Rubber tracks cause less damage to roads than steel tracks, and less rutting on soft ground than steel tracks
2.A benefit to equipment operating in congested areas, rubber tracks make less noise than steel tracks
3.Rubber tracks permit machines to travel at a higher speed than steel tracks
4.Rubber tracks insulated machine and operator from vibraion, extedin the service life of machine and decreasing operator's fatigue
5.The ground pressure of rubbr tracks equipped machinery can be fairly low, about 0.14-2.30 kg/m2, a major reason for its use on wet and soft terrain.
6. The added traction of rubber tracked vehicles permits them to pull twice the load of wheeled vehicles of the same weight.
7. Rubber tracks' pulling performance being twice that of wheels, it permits the lighter vehicles equip with rubber track to do the same pulling work than that of wheeled vehicles.

The notices of using rubber tracks
1. Adjust the tension of the rubber crawler so that the height, the variable range is 10-20mm when the machine is lifted. Readjust when the tension decreases.(Be careful because the rubber crawler may come off if the tension is too low).
2. Avoid projection from the frame around the rubber crawler, especially on its inner circumference.(Rubber crawlers are easily deformed; if it comes into contact with the frame, an accident such the rubber being cut can occur).
3. Avoid sharp projections when traveling.
4.Avoid turning too fast on concrete roads with a high coefficient of frction because this can cause accidents such as cutting the rubber.
5. Be careful that no oil, etc adheres to the rubber track. If it does, wipe it off immediately.
6. When storing for long periods, keep indoors, away from direct sunshine and rain.
7. Replace as soon as possible when abrasion of sprockets is observed


Features:
1. Installation of the Rubber Tracks
A. Too small strength: Easily causes jumping teeth, riding a tooth or steering failure of the guide wheels and supporting wheels and leads to track derailment or escapes.
B. Too large strength: Track wire will be deformed at the elongation by the excessive strain tensile, which will make the pitch changed, and track core iron and the drive wheels abnormally worn, also will make teeth touched and the track broken, the machine power loss larger, track wear exacerbated, belt crack easier as well as the track life shorter. After the track is strained, the maximum sag distance is 10-15mm, just as the pitch below.

2. Attention
In order to extend the life of rubber tracks, please complete the following work:
A. Never turn urgently on the concrete floor, gravel road, or hard and sharp road, in order to avoid speeding up the wearing, twisting and chapping of the rubber track.
B. Try not to work in the rotten field, to avoid rubber track skid and wear.
C. When the stones or other objects come into the crawler and chassis, stop immediately, and clear gravels or obstacles.

3. Warns
A. Do not travel on the road full of footstone, spinous-stone, scrap iron and other objects.
B. Do not drive in the rivers, streams and on the seacast or any rugged road.
C. Do not make the track unilaterial landing.
D. Forbid aggressive driving.
E. Avoid making a turn rapidly, please slow down and make a turn gradually.

 

Quality Control:

1.Ex works Inspection

2.Products Audits/Examination(Strict inspection according to customer's request)

3.Production Procedure Audit/Examination(Entire Procedure Control)

4.Raw material Inspection/Examination;Purchased Parts Inspection(Including All Purchased Material)

Rubber track warranty

All Pooyert rubber tracks and rubber pads are one year normal use warranty,If there is any quality problem,during the warranty period,we are responsible for the replacement of the new rubber track,just need to provide photos of the tracks as they sit on the machine and serial number on the tracks.

Company introduction:

Serving since 2000,POOYERT has been supplying the construction industry with premium grade replacement rubber track and rubber pads that can be widely applied in construction machinery,agricultural machinery and other specialized vehicles.

 

 

Warehouse:

 

Rubber Track 483*152.4*52 fit for Paver Blaw Knox PF5510,Ingersoll-Rand PF5510 Volvo PF5510 1

 

Contact Details
Shanghai Puyi Industrial Co., Ltd.

Contact Person: Grace

Fax: 86-21-3758-0295

Send your inquiry directly to us (0 / 3000)